If your aluminum or glass storefront door is broken, stuck, or just not secure enough, B & G Locksmith fixes it. We handle installation, repair, and lock hardware for aluminum storefront doors across Williamsburg, Greenpoint, Bushwick, Bed-Stuy, East Williamsburg, Downtown Brooklyn, and every corner of the five boroughs. Our locksmith counter sits inside B & G Hardware at 210 Robeling St - walk in, describe the problem, and get a straight answer from someone who works on these doors every week.
What types of aluminum and glass storefront doors does B & G Locksmith work on?
We work on the full range of aluminum storefront systems you find on Brooklyn commercial strips and mixed-use buildings. That includes:
- Single and double swing doors with top and bottom pivots, surface-mount closers, and rim or mortise locks
- Storefront door frames from systems like Kawneer and United States Aluminum - the frames you see on nearly every Williamsburg retail block
- All-glass doors with patch fittings and floor-spring pivots
- Narrow-stile aluminum doors fitted with Adams Rite deadlatches and MS series deadbolts - the most common hardware on Brooklyn storefronts
- Tempered and laminated glass panels - we coordinate glass replacement when a panel is cracked or shattered
If your door was built with a standard aluminum extrusion system, we have the hardware and the hands-on experience to service it. Landlords in Bed-Stuy, supers in Greenpoint, and shop owners on the Williamsburg Broadway corridor all call us for the same door types.
What storefront door lock brands and hardware do you install or replace?
The lock hardware on an aluminum storefront door is different from a residential deadbolt. These doors use narrow-stile-specific products, and using the wrong hardware causes alignment problems and security gaps. We stock and install:
- Adams Rite 4700 and 4900 series deadlatches - the standard for narrow-stile aluminum doors citywide
- Adams Rite MS1850 and MS1890 deadbolts for higher-security applications
- Sargent 80 series mortise locks for heavier commercial swing doors
- Dorma and LCN door closers - surface-mount and concealed, sized to the door weight
- Precision Hardware exit devices for doors that require panic hardware under NYC Building Code
- Kaba Simplex pushbutton locks for keyless entry on interior storefront vestibule doors
We pull hardware off the shelf at B & G Hardware the same day in most cases. That means no waiting on a parts order when your door is not latching the night before a business day.
How does storefront door repair or installation work at B & G Locksmith?
The process is direct. For repairs, we start with a site visit to look at the door, the frame, the closer, the threshold, and the lock hardware together. A door that will not close properly is almost never just one thing - it's usually a combination of a worn pivot, a misaligned strike, and a closer that needs adjustment. We fix the system, not just the symptom.
For new door installation, the steps are:
- Measure the opening and confirm the rough frame dimensions
- Select the aluminum frame profile and glass type for the application
- Choose lock hardware that meets NYC code for the occupancy type
- Remove the old door and frame if needed
- Set the new frame, hang the door, install and adjust the closer, and test the latch and deadbolt under real-use conditions
For small business owners in East Williamsburg or Downtown Brooklyn replacing an old wood door with a modern aluminum storefront system, this is a one-day job in most cases. For larger commercial openings or multiple doors, we schedule accordingly.
Because we are a real storefront at 210 Robeling St, you can walk in and pick door hardware off the shelf, see what an Adams Rite latch looks like before we install it, and ask questions face to face. That is something a phone-only locksmith dispatch service cannot offer you.
Call B & G Locksmith at (347) 699-9268 to schedule a storefront door repair or installation anywhere in Brooklyn or the five boroughs.
Frequently asked questions
Do you repair storefront doors that won't close or latch properly?
Yes. A door that won't latch is usually a frame alignment issue, a worn pivot, or a failed closer. We diagnose on-site and carry common replacement parts, so most repairs wrap up the same visit.
Can you replace just the lock hardware on my existing aluminum storefront door?
Absolutely. We regularly swap out Sargent, Adams Rite, and Kaba Simplex locksets without replacing the whole door. If the frame and glass are sound, there's no reason to go further than the hardware.
How fast can you get to a broken storefront door in Brooklyn?
For emergency calls we aim to reach most Brooklyn neighborhoods within the hour. Call us at (347) 699-9268 and we'll give you a realistic arrival window based on where we are that day.
Need a locksmith in Williamsburg? Walk in or call - we are on the corner.
Get a Quote