Rolling Gate Lock Repair and Replacement in Williamsburg, Brooklyn

If your rolling gate lock is jammed, broken, or you need the lock changed after a tenant or employee turnover, B & G Locksmith handles it. We work on rolling gate locks for storefronts, warehouses, garages, and commercial buildings across Williamsburg and all of Brooklyn. Our shop is inside B & G Hardware at 210 Robeling St - walk in, describe the problem, and we will tell you exactly what needs to happen.

What kinds of rolling gate locks do you work on?

Rolling gates in Brooklyn come with a range of lock types depending on the age of the building and what the last owner or contractor installed. We work on all of them regularly.

• Rim cylinders and mortise cylinders - the most common setup on Williamsburg storefronts. Brands like Medeco, Mul-T-Lock, Abloy, Arrow, and Corbin Russwin are all in our regular rotation.
• Disc detainer locks - often found on older Brooklyn gates. These wear out faster and are a frequent reason gates stop locking smoothly.
• Padlock hasps - we stock and fit heavy-duty padlocks from Medeco and Mul-T-Lock for gates that use a hasp-and-padlock setup. These are a solid upgrade from the cheap hardware store locks that get cut off.
• T-handle locks - common on roll-up garage doors in Bed-Stuy, Bushwick, and East Williamsburg. We carry replacement T-handle assemblies and can rekey them to your existing key when possible.
• Slam locks and automatic deadbolts - used on high-traffic commercial gates that need to lock on their own when the gate closes. We install and service these for businesses in Downtown Brooklyn and Greenpoint.

If you are not sure what type is on your gate, that is fine. Bring us a photo or just call - we figure it out fast.

What does a rolling gate lock service actually involve?

The job depends on what is wrong. Here is what a typical service call looks like step by step.

1. Assessment at the gate - We look at the lock body, the cylinder, the housing, and how the gate itself is sitting. A gate that is off-track or binding will destroy a new lock quickly, so we check the full picture first.
2. Rekey or replace - If the hardware is in good shape, we rekey the cylinder and cut you new keys. If the lock body is worn, corroded, or has been tampered with, we replace it. We carry cylinders and lock bodies for the most common Brooklyn rolling gate setups in our van and at the shop counter.
3. Key cutting on the spot - New keys are cut at our counter at 210 Robeling St while you wait. You leave with working keys in hand, not a voucher for a future trip.
4. Hardware upgrades when needed - If your gate has a basic pin tumbler cylinder with no security pins, we can upgrade to a Medeco M3 or Mul-T-Lock MT5+ cylinder that resists picking and drilling. These are real security upgrades for storefronts on busy Williamsburg or Bushwick corridors.

Most rolling gate lock jobs are finished in a single visit. We do not disappear after the service call - if something is not right, come back to the counter and we fix it.

Why does a Williamsburg locksmith shop beat a phone-only service for rolling gate work?

A lot of locksmith services in NYC are dispatch-only operations. You call a number, a technician shows up from somewhere, and if they need a part they do not have, you wait another day. That is a problem when your storefront gate is stuck open or will not close at the end of the night.

B & G Locksmith is a real counter inside B & G Hardware at 210 Robeling St in Williamsburg. We keep rolling gate lock hardware on the shelf - cylinders, padlocks, T-handle assemblies, and mortise cases in the brands and specs Brooklyn commercial doors actually use. When we come to your gate, we bring the right parts. When you walk in for a duplicate key or a new padlock, you get it the same day.

Landlords and supers in Williamsburg, Greenpoint, and Bed-Stuy use us for this reason. After a tenant moves out or an employee leaves, you do not want to wait two days to secure your property. We handle the rekey or replacement fast, and we can set up a master key system if you manage multiple units or storefronts.

To schedule a rolling gate lock service anywhere in Brooklyn or the five boroughs, call B & G Locksmith at (347) 699-9268. Or stop by the shop at 210 Robeling St in Williamsburg - no appointment needed for in-store key cutting and hardware.

Frequently asked questions

Can you open a rolling gate if I lost my key?

Yes. We can pick or drill the lock and replace it the same visit. We stock common rolling gate lock cylinders at the shop, so most jobs on storefronts in Williamsburg and nearby Brooklyn neighborhoods get done without a second trip.

How do I know if my rolling gate lock needs replacing rather than rekeying?

If the lock body is visibly damaged, corroded, or has been drilled before, replacement is the right call. If the hardware is solid and you just need old keys deactivated, a rekey is faster and costs less. We check the lock at your gate before recommending anything.

Do you work on rolling gates outside Williamsburg?

Yes. We serve all of Brooklyn and the five boroughs, including Greenpoint, Bushwick, Bed-Stuy, East Williamsburg, and Downtown Brooklyn. Call (347) 699-9268 to schedule.